Purchase tips for plastic doors-cleaning and maintenance of plastic doors

Plastic Door Purchase Tips - Cleaning and Maintenance of Plastic Doors

Plastic Door Specifications and Models Meet Design Requirements, Plastic Door Quality and Mechanical Performance Comply with National Specifications and Have a Factory Certificate.

2. The models, specifications, performance and requirements of hardware, fasteners, reinforced steel and metal lining plates used in plastic doors comply with the current national specifications and standards.

3. The three physical properties of plastic doors, namely wind pressure, air penetration and rainwater penetration, meet the requirements of the three performance classifications and design requirements of the current national standards, and are accompanied by a test report of this quality level.

4. The variety, specifications and quality of glass should comply with the current national industry product standards and have a product certificate. Hollow glass should have a test report.

5. The sealant sealing agent for plastic doors and openings should be elastic and adhesive.

Cleaning and Maintenance of Plastic Doors

It is best not to use alcohol for plastics, as it will cause rough surfaces to lose luster. It is recommended to use car wash liquid. If you think it is expensive, use soapy water, dip it in a cloth and soak it for a while before rubbing. It is best not to use laundry detergent, as the particles will polish the surface.

1. If the doors and windows are contaminated with oil stains and other difficult-to-clean things, you can use Jie Erliang to scrub it. It is best not to use strong acid or strong alkali solution for cleaning. This will not only easily damage the surface finish of the profile, but also damage the protective film and oxide layer on the surface of the hardware and cause rust of the hardware. Especially when some customers use sulfuric acid to clean the wall, be careful not to let the doors and windows be stained.

2. The dust on the doors and windows should be cleaned regularly to keep the doors and windows, glass and hardware clean and bright.

3. Granular debris inside the frame should be cleaned in time to prevent them from blocking the drainage channel and causing poor drainage and water leakage.

4. When you find that doors and windows are inflexible or other abnormal openings during use, you should find the cause in time. If the customer cannot troubleshoot the fault, you can contact the door and window manufacturers and suppliers so that the fault can be eliminated in time.

5. Try to avoid hitting doors and windows with hard objects or scratching the surface of profiles.

6. When opening doors and windows, the force should be moderate and try to keep the speed even when opened and closed.